Installed the Windows version of nuBuilder on Windows 8 now and it's working just fine.
That said, it's clear the problems isn't within nuBuilder in first line, it's based on the third party installation of PHP in either Wamp Server, XAMPP or AMPPS which have all the same problem with display of the error messages in Windows 8 and even Windows 7 Ultimate.
I'm going to recheck the config.php and php.ini in Windows 8 with XAMPP and see I couls error display disable using that procedure.
Will report back.
Welcome to the nuBuilder forums!
Please register and login to view forums and other content only available to registered users.
Please register and login to view forums and other content only available to registered users.
Access Problem
-
- Posts: 31
- Joined: Fri Jul 06, 2012 5:49 pm
Re: Access Problem
Ok, all done now.
In php.ini search for: display_errors (in my php.ini it's on Line 552) change On to Off and save the file. Restart the service and now the display is free from error messages.
Just to tell: globally, it doesn't matter what kind installation you use, you'll need to change some more settings in php.ini
Ok, I'm not an PHP programmer and dint have knowledge about it but from various experiences, I have an "eye" for such and could sometimes find some solution. May my experiences also helps others too.
Now I could really start to work with nuBuilder.
In php.ini search for: display_errors (in my php.ini it's on Line 552) change On to Off and save the file. Restart the service and now the display is free from error messages.
Just to tell: globally, it doesn't matter what kind installation you use, you'll need to change some more settings in php.ini
All other settings seems to good and correct. The changes I had implement to my php.ini were because firstly I was getting problems with upload limits. I than checked the php.ini in details and found that I should change that other settings as well to not get bothered again with reaching the limits. The only change I had not realized at first were about those display errors.In: Resource Limits Section:
max_execution_time = 30 change to: 1000 or above
max_input_time = 60 change to: 1000 or above
memory_limit = 128M change to more, I set mine to 1024M
In: Error handling and logging Section:
error_reporting = E_ALL & ~E_NOTICE (should look like this)
display_errors = On change to: Off
In: Data handling Section:
post_max_size = 8M change to: higher value, mine is set to 750M
In: File uploads Section:
upload_max_filesize = 2M change to: higher value, mine is set to 750M
max_file_uploads = 20 change to higher value, mine is set to 60
Ok, I'm not an PHP programmer and dint have knowledge about it but from various experiences, I have an "eye" for such and could sometimes find some solution. May my experiences also helps others too.
Now I could really start to work with nuBuilder.